Snap Connection Steel Mesh Concrete Built-in Insulation System
The Snap Connection Steel Mesh Concrete Built-in Insulation System is a high-performance insulation technologythat integrates reinforced concrete, steel mesh, and advanced insulation materials. It enhances structural durability, thermal resistance, and energy efficiency while minimizing heat loss. This system is widely used in exterior and interior walls, industrial facilities, cold storage warehouses, and eco-friendly building projects.
- Excellent weather resistance – No peeling, cracking, or deterioration after durability testing
- High impact resistance – Withstands impacts above 10J
- Low water absorption – ≤ 500 g/m²
- Superior moisture permeability – ≥ 0.85 g/(m²·h)
- Freeze-thaw durability – Maintains structural integrity after 80 freeze-thaw cycles
- Thermal insulation efficiency – Meets energy-saving design requirements
- Extreme temperature resistance – Withstands temperatures for ≥ 3 hours
- Waterproof performance – No water penetration for 2 hours.
This export-grade insulation system complies with international quality standards and is in high demand for sustainable and energy-efficient construction projects worldwide.
The following table presents the key performance indicators of the Snap Connection Steel Mesh Concrete Built-in Insulation System, ensuring compliance with international quality standards for thermal insulation, structural strength, and environmental sustainability.
| Test Item | Unit | Performance Requirement | Test Method / Standard |
| Weather Resistance | – | No cracks, peeling, or visible damage after tests | – |
| Impact Resistance | J | ≥10 Grade | – |
| Water Absorption | g/m² | ≤500 | – |
| Water Vapor Permeability | g/(m²·h) | ≥0.85 | JGJ144 |
| Freeze-Thaw Resistance | – | No visible damage after 80 cycles, tensile bond strength ≥0.10 MPa | – |
| Thermal Resistance | (m²·K)/W | Meets design requirements | GB/T9978 |
| Extreme Cold Resistance | h | ≥3 | GB/T9978 |
| Surface Water Impermeability | – | No penetration after 2 hours | JGJ144 |
The application of the Snap Connection Steel Mesh Concrete Built-in Insulation System follows a systematic and efficient process, ensuring maximum durability, insulation performance, and structural integrity. Below are the key steps:
1. Preparation of Structural Framework
- Steel mesh panels are pre-fabricated according to project specifications.
- Necessary snap connectors and support brackets are installed.
2. Installation of Insulation Panels
- High-performance insulation boards are securely placed within the steel mesh structure.
- The insulation material is fixed to prevent displacement during the concrete pouring phase.
3. Concrete Pouring & Integration
- A specially formulated lightweight concrete is poured over the mesh structure.
- The steel mesh reinforces the structure, ensuring high impact resistance and load-bearing capacity.
4. Finishing & Sealing
- The outer and inner layers are treated to enhance weather resistance and water impermeability.
- Additional coatings or facades can be applied depending on the project requirements.
This innovative insulation system is widely used in exterior and interior walls, industrial buildings, and eco-friendly constructions, providing high energy efficiency, thermal insulation, and long-lasting structural stability.